How to wear a backless/strapless bra!
(AND SEE WHY YOUR ABRA IS A TOP QUALITY BACKLESS & STRAPLESS BRA)
Important: For best adhesion, clean your chest area with soap or exfoliant, rince thoroughly and dry well. Apply our Abra within the hour. AVOID moisturizers, powders, oils anywhere on or near the chest or hands prior to the application of your Abra.
Connect the front closure. Look for the « pointy » side of the cups and form a « V » in the center with a straight line at the base so the « points » are up. This will be the positioning of your Abra when you’re done.
Apply the cups one at a time : In front of a mirror (smile !), flip one cup outward while holding it by the edges. Apply on the low part of your breast below the nipple but NOT underneath the breast (Yes you heard me right ! NOT underneath !). Especially true for sizes C and up and-or lower breasts.
IMPORTANT: the central edge of the first cup you apply should be a vertical line. (Yes vertical ! You got that right !) It will shift into a « V » after applying the second cup.
Apply the second cup by squeezing in and up in a diagonal motion (pic. 4-5) (diagonaly yes !).
Tips: If you wear a low-cut dress (pic. 6) or a deep V-neck (pic. 7) adjust the bra accordingly. Your nipples most likely won’t end up in the centre of the cups. Are they covered ? If yes you’re good!
To see the true result, put your top back on after you ajusted your Abra. The bra might look odd by itself for it doesn’t usualy cover the whole breasts but no judging until your top is on.
WASHING: Regular washing is important to keep the tackiness of the adhesive.Hand-wash only, using warm water and liquid dish soap to remove any body oil or other residue that may clog the surface of the adhesive. Use the palm of your hand in a circular motion to clean. Rinse in warm water and hang to dry. Do not use a towel to dry. Once dry, store your bra in its original packaging and/or apply plastic cling wrap on the adhesive to protect it from dust and lint.